Dredgers for Sale or Charter
Trailing Suction Hopper Dredgers for Sale
4.150 m3 Hopper Dredger
1.850 m3 Split Hopper Dredger
1974 EU built, 2010 rebuilt, BV class, SS passed Oct. 2016. l x w x d (m): 80.00 x 11.50 x 5.60. draft loaded (m): 4.50. Propulsion: 2 x Cat 3512, totalling 1.900 kW, each driving a rudder proppellor. Speed 11 knts. location: in operation SE Asia: Price: Inquire
Trailing Suction Hopper Dredgers for Charter
4.500 m3 Hopper Dredger
Various other well maintained, state of the art, Trailing Suction Hopper Dredgers available for charter.
2.800m3, L: 80,00 m, W: 14,00 m, D: 6,30 m, Draft: 5,20 m, DW: 3.500 tons, Total power installed: 4.400 kW, 11 kn, Bottom doors, Pump ashore facility, Rainbow. West Africa
4.500 m3, L: 90,00 m, W: 19,00 m, D: 7,30 m, Draft: 6,85 m, DW: 6.700 tons, Total power installed: 9.400 kW, 11 kn, Bottom doors, Pump ashore facility, Rainbow. Europe
4.800 m3, L: 95,00 m, W: 23,00 m, D: 7,00 m, Draft: 6,50 m, DW: 7.000 tons, Total power installed: 6.200 kW, 12 kn, Bottom doors, Pump ashore facility, Rainbow. Europe / Americas
5.600 m3, L: 95,00 m , W: 21,50 m, D: 7,60 m, Draft: 7,10 m, DW: 8.300 tons, Total power installed: 6.700 kW, 13 kn, Bottom doors, Pump ashore facility, Rainbow. Europe / Middle East
Larger Hopper Dredgers in the range of 8.000 to 24.000 m3 are available.
Please contact us for further information
A Trailing Suction Hopper Dredger is a self-propelled vessel, used for maintaining or deepening waterways, or to dredge sands to replenisch beaches or to be used for construction purposes on land, thereby using powerful pumps and deploying one or two suction pipes fitted with a draghead, which are lowered onto the seabed, whilst moving slowly forward. The dredged materials are held in its hopper, to be discharged at the intended location, often many miles away from the dredging area, 1) through its bottom-doors, mounted in the keel of the vessel, 2) to pump these ashore, sometimes over distances of more than one kilometer, by means of a quick coupling mechanism, usually mounted at the bow of the vessel, or 3) spraying the material over a short distance, also known as rainbowing.
Cutter Suction Dredgers for Sale
A Cutter Suction Dredger is a stationary dredger equipped with a rotating cutting device (cutterhead) mounted to the end of a ladder and which cuts the material prior to being sucked up by flow of a powerfull suction pump. During the dredging process the Cutter Suction Dredger’s ladder is pulled near the cutterhead by two side wire winches from side to side and rotates horizontally in a radius of about 70-90 degrees. At the aft side of the Cutter Suction Dredger is fixed in the horizontal plane to the a certain position on the seabed, usually by means of a spud pole. After the material has been sucked up, it usually enters one or two powerful inboard pumps, which pump the material via a floating line to e.g. a sandfill. A Cutter Suction Dredger is more suitable to dredge the harder materials.